Laser Cut/
/

In selecting the services of metal cutting, there are several good choices. However, there are significant differences between these options, and informed buyer can save a packet with the correct option.

Laser Cutting:

Laser cutting involves light moves online straight toward the workpiece, the metal removal by vaporization. Laser cutters usually have tolerances up to .0005 inches. They are potentially the most accurate and may have less bleeding (or width of cut). They are also faster in cutting thin material (16 gauge or thinner). More laser cutting powerful can cut mild steel as thick as 1.25 inches. The supply of greenhouse gas laser consists of laser and electricity.

Jet Water Court:

In water jet cutting is abrasive and high pressure water in the 35-75,000 PSI oriented piece of work that results in reduction precise abrasion. Steel parts can be as thick as 6 inches and stay within tolerances of + / – .003 of an inch. The metal materials can differ for ceramic tiles and just about anything between them. It is the slowest method of measuring the cut the services mentioned in this article. The supply includes water jet water and moderately expensive calls tiny garnet stones.

Plasma cutting:

Plasma involves cutting high temperature plasma arc and a ground search. In this case, it seeks a ground through the work piece – and in the process removes metal by melting material and blowing away from the work area. Plasma cutting by far the fastest speed when cutting thick metal. Plasma cutting requires electricity and certain gas to operate.

Â

Which Cut method works best?

The best method depends to a large cutting As the skills required. If a job does not involve a piece of metal 1 "wide or less and require moderate to tight tolerances, nothing beats a laser cutter. If one piece is made of an exotic material that has a low tolerance to heat (called "heat affected zone), then a jet of water is probably your best bet. If the material is metallic and very thick (eg 1.5 inch or more) and the velocity is crucical then plasma cutter is the best.

/
/ /
/

Joel Barrett is an AutoCAD engineer and manager of laser cutting services at Berrien Metal Products, Inc. in Buchanan, Michigan. He recommends that you contact him with questions!

/
/

Toll-Free: 800 978 5300 x16
Local: 269 695 5000 x16
Website: http://www.metalfabrications.com/laser-cutting.html

/
/ /
//
/Demo of Laser Cut Stand for Nokia N900
/
//
//
//
//
/
/
//
//
/
/
/ /
/[affmage source=”ebay” results=”25″]Laser Cut[/affmage]/
/[affmage source=”amazon” results=”8″]Laser Cut[/affmage]/
/[affmage source=”clickbank” results=”4″]Laser Cut[/affmage]/
/

Filed under: Uncategorized

Like this post? Subscribe to my RSS feed and get loads more!